显示标签为“斧头”的博文。显示所有博文
显示标签为“斧头”的博文。显示所有博文

2011年1月15日星期六

Fiskars 7850 Hatchet Review

Fiskars 7850 Hatchet Review: "
The Fiskars hatchet is one of those tools that I had no interest in reviewing, but ultimately decided to do it because of how popular and readily available they were. Several years ago I had a similarly designed Gerber hatchet with which I was very disappointed, so I was reluctant to spend my money on another one. I’m glad I did.







Specifications:

Manufacturer: Fiskars (Finland)

Axe Head Weight: About 1 lb; total weight is 1.25 lb

Axe Length: 14 inches

Axe Head Material: Forged carbon steel, HRC 50-56 on the edge

Handle Material: Nyglass

Cost: $25.00







I was informed that the same hatchet (14 inch handle) that is on the Fiskars website is different from the one I have. The one on the website is apparently the one currently sold in Europe for about $50.00 under the designation X7. I tried to look for it in the US, but was only able to find the model I have reviewed above. I bought mine about two months ago. The Fiskars website lists the X7 hatchet as having a 1.28lb head and 1.65lb overall. I measured the one I tested and it is 20oz or 1.25lb overall. I estimate the head to be about 1lb.



In terms of cost, this hatchet is in the lower mid-price range. It is not one of the many $10 hatchets, but can easily be a person’s first axe without too much worry about having to replace it later on.



As with the other hatchets, I will be comparing the Fiskars 7850 Hatchet with the Gransfors Bruks Wildlife Hatchet. Here you can see the two of them side by side.









The handle length of the Fiskars hatchet is just a bit longer than that of the Wildlife hatchet, putting it just shy of 14 inches. Clearly it is a synthetic handle, so there are no grain issues to discuss. It is made of a plastic called Nyglass, which is supposed to be designed to absorb shock. It is also much stronger than a wooden handle. A short Google search will pull up several videos of trucks being driven over the handle without damaging it. The handle is also completely hollow, making it very light weight. The opening on the bottom however can allow dirt to get inside the handle. The handle does not pass through the head of the axe, but is rather bonded to the outside.







The head of the Fiskars 7850 Hatchet is about 1lb, about the same as the Gransfors Bruks Wildlife Hatchet. The two hatchets feel very similar in weight.







The grind of the head on the Fiskars is very different from traditional axe design. It is in effect ground like a knife, with a flat grind. Since the head has no eye, it is very narrow overall, although the cheeks expand rather rapidly when compared to the Wildlife hatchet.







The axe came with something that resembled more of a carrying case than a sheath. It is a plastic handle into which the axe snaps. It is good for carrying the hatchet around the yard, but if you will be going into the woods, you’ll have come up with some other type of sheath.



During testing, I was very pleasantly surprised by this hatchet. It is very light and comfortable to use. It was sharp when it arrived, and required only a few minutes withe the sharpening stone before it was razor sharp. It’s chopping ability was also impressive. As you can see from the picture, it slightly outperformed the Gransfors Bruks Wildlife Hatchet. The Fiskars hatchet was not able to cut at an angle as shallow as that which can be achieved with the Wildlife hatchet, but it was more than sufficient for any chopping job. The difference was noticeable only at extremely shallow angles.







It is also a much better splitter than the Wildlife hatchet. The fact that the cheeks of the head expand rapidly, and lack the concavity of the Wildlife hatchet, makes the Fiskars much better at pushing the wood apart.



The steel that was used in the head, however, combined with the flat grind of the bit, did create one problem. As you can see fro the picture, I was able to dent the bit while chopping. Because the bit of the Fiskars hatchet is not convex, but is rather flat ground, it is thinner than that of a traditional axe. This gives good chopping performance, but creates for a weaker edge. I was able to get it back into shape in the field with just my DC4 sharpening stone. The steel also appears to be relatively soft, which thankfully caused the edge to only roll rather than chip.







You may also want to take a few minutes and sand down the transition between the head and the handle. The area where the handle wraps around the head creates a ridge which can get snagged when chopping. Some sanding should take care of that.



Overall, I am very satisfied with this hatchet. I must also admit that I was surprised by the results. Based on my prior use of similarly designed axes, I expected it to perform poorly, but you can’t argue with results. I very much like the handle. It is stronger and lighter than a wooden one, allowing for more of the weight to be concentrated in the head. The performance was very good, especially considering that this is a $25 hatchet. If you are just getting into using axes, a Fiskars may be a good place to start.



As far as I know, the manufacturer produces additional bushcraft appropriate axes: The 23in Chopping Axe (2.31 lb head; 23.5 inches in length), The 27in Chopping Axe (2.31 lb head; 27 inches in length), and The 8in Hatchet (0.86 lb; 8 inches in length).



Ross

http://woodtrekker.blogspot.com/
"

2011年1月12日星期三

CQC-T Fehrman

CQC-T Fehrman: "
Like new, only shaved the hair on my arm. I made a kydex sheath for it, has a few scratches from it. Designed by Emerson built by Fehrman. I bought this direct from Fehrman last year, has just sat around waiting for use....S-7 steel fellows!! Also comes with the original sheath from Fehrman



Price $280 shipped in CONUS, terms Paypal or USPSMO or partial trade for Emerson A-100 or Bark River Golok or?





From Fehrman knives:

The CQC-T is a personal combat tool, first and foremost. We do not recommend you purchase it as a throwing Tomahawk. It's handle design and blade geometry is meant for retention and aggressive cutting, respectively. O-Rings in the handle will likely require replacement over time and can be replaced for a nominal fee by calling customer service.



Steel: Billet Machined S-7, Rc 56-58

Handle: ST “super-tough” modified nylon

Ergonomics: Oval Design – Specialized O-Rings for added retention

Overall Weight: 16 oz w/o sheath

Cutting Edge Length: 2 7/8"

Handle Length: 13 3/4"

Blade thickness: .200 stock

Included Sheath: Jumpable nylon – LBE/LBV, MOLLE, Sling, Belt





Pics





"

Spike Tomahawk

Spike Tomahawk: "
Here's a spike tomahawk forged from a 24oz. U.S. made ball peen hammer. Differentially heat treated. Aged patina. Handle is curly maple.



O.A.L of head: 9 in.

Blade Width:2 3/4 in.

Spike Length from Center of eye: 4 5/8 in.

Handle length: 19 3/16 in.

Per the manufacture, The steel in the hammer heads I use: 1080



Price: $225.00 Paypal or credit cards accepted thru paypal. Price includes USPS conUS shipping,insurance,confirmation and Paypal fees.















First to post "I will take it" gets it.
"

Vietnam Era Tomahawk, Nam Hawk

Vietnam Era Tomahawk, Nam Hawk: "
Very Rare Vietnam Era Hawk



see pics, shows age, doesn't show use



handle has some inperfections in paint and seems that previous owner/s tried to smooth out with black paint



was able to get 2 of these (someone was disposing a large military collection) I will only be letting one go right now

















Really only interested in trade list below...

of course +/- $ if needed



new or used



Hawks



Emerson CQC Tomahawk

Two Hawks tomahawk either warbeast or warhawk

any of the RMJ Tactical Hawks



Blades (any from that manufacturer if no specific is listed)



spartan

crusader forge

trident

sniper bladeworks

mercworx

hak

kingdom armory

american kami

burchtree

boye

yuna

spyderco temperence 2

spyderco orange military

spyderco sage 2

strider fixed blades only

ZT 0301 or 0302

ZT-0551 Hinderer

Emerson folding (smaller) karambit

Large fixed karambit, custom/busse quality

Scrap yard, yard hook

Swamp Rat Mini Uncle Mojo
"

2011年1月3日星期一

Council Tool Hudson Bay Camp Axe Review

Council Tool Hudson Bay Camp Axe Review: "
The next medium size axe I want to review is the Council Tool Hudson Bay Camp Axe (manufacturer’s code 175HB28). It has proven to be an excellent tool from a company that deserves a closer look. For some of the pictures the paint has been removed from the head to provide for a better look.







Specifications:

Manufacturer: Council Tool Co. Inc.

Axe Head Weights: 1.75 lb

Axe Length: Advertised as 28 inches; measured as 26 inches

Axe Head Material: Carbon steel, HRC 48-55 on the Rockwell scale

Handle Material: Hickory

Cost: $47.00







This is a mid range axe, both in size and price. It is one of the few axes left that is manufactured in the United States from a company that is very responsive to the customer and offers a wide range of products.



In this review I will be comparing the Council Tool Hudson Bay Camp Axe to the Gransfors Bruks Scandinavian Forest Axe. Here you can see the two axes next to each other.









The handle of the Council Tool Hudson Bay Camp Axe is an inch longer than that of the Gransfors Bruks Scandinavian Forest Axe, making it exactly 26 inches long. Even though the axe is officially advertised as being 28 inches long, a closer look at the description on the Council Tool website reveals that during the hanging process, two inches is removed from the handle.



The grain of the handle on the axe I purchased (left) is very poor. It is not the worse I have seen, but if I was planning on using this axe as my main cutting tool, I would certainly put on a new handle. There did not appear to be any polish or finish of any sort on the handle. I had to oil it before use. Other than that, the handle is very comfortable, and quite slim even when compared to that of the Gransfors Bruks Scandinavian Forest Axe, making for a very streamlined axe.







The head of the Council Tool Hudson Bay Camp Axe weighs 1.75 lb, making is a quarter of a pound lighter than that of the Gransfors Bruks Scandinavian Forest Axe. It is attached to the handle using one metal wedge. At first the connection seemed flimsy to me, but through all the testing, the head remained securely in place. The head is well shaped. The cheeks are fairly thin, and the convex of the cutting edge is just a bit thicker than that of the Gransfors Bruks Scandinavian Forest Axe. The part I don’t like about the head is the abrupt transition of the cheeks when they reach the eye. Instead of providing for a continuous curve, they almost form an angle to the eye, which would impede efficient chopping.







The head is a Hudson Bay style, and has a very large bit, providing form more cutting surface than the Gransfors Bruks Scandinavian Forest Axe.







The balance of the axe is not great, but is also not too bad. Ideally the head would stay horizontal to the ground when balanced like it is in the picture. As you can see, the bit hands lower than the rest of the head, meaning the poll is too light. The balance of an axe is important when we are talking about mid or full size axes because it contributes to the accuracy of the axe.







The axe came with no sheath.



When the axe arrived, it was not as sharp as I needed it to be. About ten minutes with the file and a sharpening stone, put a paper cutting edge on it. As I mentioned, the convex of the cutting edge was a bit thicker than that of the Gransfors Bruks Scandinavian Forest Axe. I got the urge to thin it out. It took me another thirty minutes with the file, and fifteen minutes with the sharpening stone to create the edge I wanted. When I was done, I took it out for testing.



The performance of the Council Tool Hudson Bay Camp Axe was surprisingly good. When it came to chopping, even though the Council Tool Hudson Bay Camp Axe is a quarter of a pound lighter than the Gransfors Bruks Scandinavian Forest Axe, it kept up with it, and even slightly outperformed it (results in the picture are after 25 swings). This is probably a result of the larger bit and slightly longer handle. Keep in mind, that if I had not thinned out the bit, the axe would not have performed as well, although it would have been quite acceptable.







When it comes to splitting, the Gransfors Bruks Scandinavian Forest Axe should in theory outperform the Council Tool Hudson Bay Camp Axe because of the abrupt transition in the head of the Council Tool axe, but honestly, I was not able to see a difference. The truth is that with axes this size, you would need to split some very large logs to be able to see differences in performance. When it comes to bushcraft, logs that size would be very hard to find.



Overall, this is a very good axe, considering the price tag. It is not perfect by any means, but with some work, it can be turned into a very well performing tool. It is also light enough that the head can be used on a shorter, more portable handle. I would love to see it on a 24 inch. Council Tool also makes the same head with a 18 inch handle. I did not use it however because I have found such handles to be too short, especially because they are shortened even further in the hanging process.



There has been some talk from Council Tool that they will be releasing a “bushcraft” version of the Hudson Bay Camp Axe, which will have a non painted head, and be more highly finished. It would certainly be worth a look if the trice tag can be kept low enough.



As far as I know, the manufacturer produces additional bushcraft appropriate axes, which are too numerous to list here, but include Hudson Bay, Jersey, and Dayton patterns.



Ross

http://woodtrekker.blogspot.com/
"

2010年12月29日星期三

F.A.X Fast Axe.

F.A.X Fast Axe.: "
I was gifted a Fast Axe for Christmas by a buddy. This is an exceptional tool. I have played with them before and could see lots of utility. This is going to be a regular part of my outing gear. It is something of a cross between a hatchet, ulu and knife. It could easily replace a fixed blade knife and hatchet for light travel kit. A buddy of mine recently skinned a pig with his and had an easier time of it than he has had with purpose made knives int he past. They are available only through http://equinoxcoronado.com/ and the Fast Axe is made by Tops knives so you can be assured of quality.





One of the cool things about the Fast Axe is its deceptive size. I like tools that fit in my pocket. The Fast Axe is surprising in that it fits comfortable in a front pocket. I can even sit down and not have it jab into my side. It does not profile, and is quite concealable. Just an added bonus.

"

2010年12月26日星期日

Razor-Back Camp Axe Review

Razor-Back Camp Axe Review: "
This is yet another axe manufacturer whose products I wanted to test. I found that the price far exceeds the quality.







Specifications:Manufacturer: Union Tools

Axe Head Weight: 1.25 lb

Axe Length: 14 inches

Axe Head Material: Unknown carbon steel

Handle Material: Hickory

Cost: $18.00 (can be found for anywhere between $15 and $30)







The first thing I want to note here is that Union Tools, the manufacturer of this hatchet is actually a huge conglomerate of different manufacturers, which includes, Ames True Temper, Jackson Tools, Razor-Back, Garant, and others. Each division seems to manufacture its own products, so the quality will not always be comparable, even though all the products are made under the Union Tools umbrella.



As with all the other hatchets, I will compare this one to the Gransfors Bruks Wildlife Hatchet. Here you can see the Razor-Back Camp Axe next to the Gransfors Bruks Wildlife Hatchet.









The handle is the same length as the Wildlife Hatchet, around 14 inches. The one I bought had good grain and seemed to be of good quality even though it was covered by a very thick coat of polish.







The head was not properly aligned with the head on the example I have. As you can see, the head stands a bit to the left of the handle. This is an unfortunate reality when it comes to low cost axes.







The head itself is very poorly designed in my opinion. It has a very thick cutting edge, which significantly decreases it’s chopping ability. In fact, it was so thick that I had trouble getting it to stick in the oak for the pictures. The head then continues to be fairly narrow, until it reaches the eye. At that point it expands significantly, creating a huge eye. I don’t see any reason for such a design, and it significantly hinders the chopping ability of the hatchet.







Splitting is not too bad. While some force is required to push the large eye through the wood, the fact that it is so wide, and the edge is so thick, splits most wood quite well. The head is attached to the handle using a wooden wedge and a circular metal pin. The top of the handle seemed to have been damaged and splintered at some point, but the head did not become loose during testing.







The hatchet does not have a sheath, but rather comes with a rubber cover for the edge. It is very likely to end up at the bottom of your pack.



Overall, I can not think of any reason why anyone would spend $30, $15 or even $10 for this hatchet. It gets significantly out performed by the Gransfors Bruks Wildlife Hatchet, which is a quarter of a pound lighter than the Razor-Back Camp Axe. There are many other much better low cost options out there on the market.



As far as I know, the manufacturer produces additional bushcraft appropriate axes: The Boy’s Axe (2.25 lb head, 28 inches in length), The Dayton Single Bit Axe (3.5 lb head, 36 inches in length), The Double Bit Axe (3.5 lb head, 36 inches in length) and the S.B. Michigan Axe (3.5 lb head, 36 inches in length).



Ross

http://woodtrekker.blogspot.com/
"